Vereinfachte Verflüssigungsbeurteilung nach EN 1998-5 §F + EN 1997-1 Anhang: Seed & Idriss (1971), CSR/CRR/FoS pro Schicht bis 20 m Tiefe, Ishihara-Setzung, Maßnahmenempfehlungen.
Standards compliance
EN 1998-5:2004 §F — Informative Annex: Simplified Liquefaction Assessment Method
EN 1997-1:2004 — Geotechnical Design (informative reference)
Seed & Idriss (1971) — Original simplified procedure
Youd et al. (2001) — NCEER corrections and CRR correlations
Idriss & Boulanger (2008) — Fines content correction and Kσ factor
EN 1998-5 §F bietet ein informatives (nicht vorgeschriebenes) vereinfachtes Verfahren zur seismischen Verflüssigungsbeurteilung auf ebenem Gelände. Es basiert auf der Seed & Idriss (1971) vereinfachten Methode.
CSR = 0,65 × (a_max/g) × (σ_v/σ′_v) × r_d. Es stellt die normalisierte zyklische Scherspannungsbeanspruchung dar, die das Erdbeben auf die Tiefe ausübt.
CRR = CRR₇.₅ × MSF × Kσ. CRR₇.₅ basiert auf (N₁)₆₀,cs nach Youd et al. (2001). MSF skaliert auf die Entwurfsmagnitude. Kσ korrigiert die effektive Überlagerungsspannung.
(N₁)₆₀,cs ist der SPT-Schlagzahl, normalisiert auf 60% Energieverhältnis, überlagerungskorrigiert (CN) und für Feinkorngehalt FC ≥ 35% nach Idriss & Boulanger (2008) angepasst.
Nach Ishihara & Yoshimine (1992) wird die volumetrische Dehnung ε_v aus FoS und Dr abgeleitet. Schichten mit FoS < 1,0 tragen proportional bei. Konsultieren Sie einen qualifizierten Geotechniker.
Bei hoher oder moderater Empfindlichkeit (FoS < 1,25) für wichtige Bauwerke (Klasse III/IV). Methoden: Steinverdichtung, Jet-Grouting, Pfähle, Auskofferung.
Methodology
1. Cyclic Stress Ratio (CSR): CSR = 0.65 × (a_max/g) × (σ_v/σ′_v) × r_d. The 0.65 factor accounts for the number of equivalent uniform cycles. r_d is the stress reduction coefficient from Liao & Whitman (1986).
2. Corrected SPT Blow Count (N₁)₆₀,cs: The SPT N-value is first corrected to 60% energy ratio (N₆₀), then normalized for overburden (CN), and finally adjusted for fines content (FC) using Idriss & Boulanger (2008): for FC ≥ 35%, a fines correction ΔN = 5.6×exp(0.06·FC − 0.22) is added.
3. Cyclic Resistance Ratio (CRR): CRR₇.₅ is derived from (N₁)₆₀,cs using the Youd et al. (2001) clean-sand correlation. MSF scales CRR to the design magnitude (Seed & Idriss 1979, Idriss 1995). Kσ corrects for effective overburden stress (Harder & Boulanger 2006).
5. Post-Liquefaction Settlement: Volumetric strain ε_v is estimated from Ishihara & Yoshimine (1992) using the FoS and relative density Dr (inferred from (N₁)₆₀,cs). The settlement is S = ε_v × H_layer.