Drop in your steel model.
Get an instant Eurocode check.
Instant EN 1993-1-1 utilization + EN 1993-1-8 connection flags + clash count.
Full 12-page PDF report delivered free to your work email.
Frequently Asked Questions
What file formats are accepted?
The auditor accepts IFC 2x3 and IFC 4 files in STEP P21 format (.ifc). Zipped IFC files (.ifczip) are also supported. Tekla-exported .nwd and .dwg files are on the roadmap for v2.
How accurate are the Eurocode checks?
The teaser applies EN 1993-1-1 §6.2.5 cross-section bending resistance and §6.3.2 lateral-torsional buckling using conservative estimated imposed loads (EN 1991-1-1, office/industrial occupancy). Profile properties come from EN 10365. The checks are technically defensible as a first-pass audit — they cite the relevant clause and use recommended partial factors (γ_M0 = γ_M1 = 1.00). For final design verification, upload your PDF drawings to the full FrameAI pipeline which uses your actual load schedule.
What does the free report include?
The 12-page PDF covers: (1) Cover page with overall RAG status, (2) Executive summary with top 5 hotspots, (3–8) Full member utilization table with M_Ed, M_pl,Rd, M_b,Rd, and pass/fail for every member, (9) EN 1993-1-8 connection flag summary, (10) Clash detection results, (11) Prioritised remediation actions, (12) Next steps and Eurocode references.
Is my file stored permanently?
No. Uploaded IFC files are processed in memory and not written to disk. The computed audit results (not the original IFC) are stored for 7 days so your report can be re-delivered if needed, then automatically purged.
What is FrameAI and what else can it do?
FrameAI is an autonomous structural engineering platform. Upload a structural steel PDF drawing and get full Eurocode checks (EN 1993-1-1, -1-8, -1-9, EN 1992-1-1, EN 1994-1-1, EN 1997-1, EN 1998-1), DSTV NC1 fabrication files, DXF shop drawings, IFC 4 model export, and Excel BOM — all within 60 seconds. No manual modeling required.