Run a Free IFC Audit
Check any IFC BIM file against Eurocode without creating an account — get a 7-day report link in seconds.
Run a Free IFC Audit
No account needed — FrameAI's /audit page is completely free. Drop any IFC file and get a health-check that tells you what's wrong and exactly where in the model the problem lives.
Before you start
| Item | Details |
|---|---|
| Access | No login required |
| File format | IFC (IFC2x3 or IFC4) |
| Maximum size | 50 MB |
| Time | ~2 minutes |
Step 1 — Go to /audit
frameai-structural.polsia.app/audit. No sign-up needed.
Step 2 — Upload your IFC
Drag your IFC file onto the upload zone. You don't need an account to start.
Step 3 — Wait for analysis
Processing takes 60–90 seconds. FrameAI scans every structural element and checks it against Eurocode requirements.
Step 4 — Review the issues list
When complete, the dashboard groups issues by severity:
| Severity | What it means |
|---|---|
| 🔴 Critical | Likely a code violation — check this first |
| 🟡 Warning | Could be an issue — review before design approval |
| 🔵 Info | Suggestions for model quality improvement |
Step 5 — Navigate to the problem
Click any issue — FrameAI highlights exactly which element in the model has the problem, with the relevant code clause (e.g., EN 1993-1-1 §6.3.1) and the fix recommendation.
What you should see
An audit dashboard with:
- **Critical count** (red) — model-breaking issues
- **Warning count** (yellow) — potential issues to review
- **Info count** (blue) — model quality suggestions
- Clickable issue cards that navigate to the problem element in the model
Common problems
**"No structural elements found"**Your IFC might be an architectural model — no beams, columns, or slabs. Go back to your BIM tool (Tekla, Revit, ArchiCAD) and export the
**structural model**, not the architectural shell.
**"Upload stuck at 0%"**Check your firewall — FrameAI needs outbound HTTPS to
api.frameai.com. Corporate proxies often block this. Try from a different network or contact your IT team.
**"Results are blank"**Your IFC may be IFC4 format with incompatible geometry. Try re-exporting from your BIM tool as
**IFC2x3** — it's the most widely supported schema and FrameAI reads it best.
What's next?
Upload Your First PDF — full analysis with Eurocode calculations
Export to Fabrication — DSTV NC1 for steel workshops
ROI Calculator — see how much time FrameAI saves your team